No-Sew DIY Magnetic Fabric Door Shade

Whew! That’s a mouthful of a title, hug?!

Just callin’ it like it is, people.

You see, once upon a time, I had these incredibly blah – oh, and UNmatched curtains in my kitchen. Yes, they’ve been up for oh, about 9 years. And I JUST noticed – scratch that – my HUSBAND just noticed the pair were different. Take a look for yourself…

DIY Magnetic Door Shade

Take a look at the top of them. One has a rouched (is that a word??) top, one…does not.


ANYwho…this gave me the kick in the pants to find a cuter solution, but it’s hard to find a shade for a kitchen door.

So I decided I was gonna solve this on my own.

No-Sew DIY Magnetic Door Shade

Here’s how I did it:

I was already a step ahead of the game, because I have that silver magnetic rod to start with.

I went to JoAnn Fabrics and found a subtle pattern fabric in light blue and cream – didn’t want anything too bold. I bought one yard and had a coupon, so it cost me a whopping $4.50.

I had some iron-on hem tape already, so I cut the fabric to the size of the window part (the part it needs to cover), and added on an inch all around.

Here’s why – I had to add my hem. I do NOT sew, and I am soooo jelly of those who can. Lucky for me, there’s this awesome stuff to help a girl out, that only involves some tape and an iron.

It’s so easy to use, too. First, iron down where the tape will be going, making a pleat-like thing (Can you tell I have no idea what the terminology is when it comes to all things sewing?!) . Then, lay the tape down. Iron over it.

Voila! You have a hem.

DIY Shade

Repeat on all sides. You’re left with a hemmed piece of fabric.

No Sew DIY Shade

BUT! On the top hem, make sure you make it larger – large enough for the rod to slide through, like this big:

No Sew DIY Door Shade

So I’m left with this:

DIY No Sew Door Shade

Then came the tricky part.

How was I going to pull it up every morning to let the light in, and pull it down every night for privacy?


I picked up these magnets from Lowe’s:

DIY Shade

(There’s 8 pieces in the pack, I just happened to forget to take a pic before I used them!)

I pulled the fabric up to make it look like it would if it were pulled up:

DIY Door Shade

Then I ironed that bad boy to make those natural pleats. You’ll find out why in a sec:

No Sew DIY Door Shade

I even went in between each layer and ironed:

DIY No Sew Door Shade

The reason for these pleats, is to ensure it naturally pulls up that way, when I attach the magnets.

Which brings me to the next step. I hot glued the magnets to the sides (on the back of course!)

DIY Door Shade

And since it was impossible to take a picture of myself as I slide both sides up (and have no patience to wait until tonight for my husband to do it;), I took a series of pics to show you. Basically, in the morning, I just slide the sides up, like so:

No Sew DIY Shade

The magnets just do the work! Then at night, just pull it down.

So here’s what you’ll need if you want to give this a go:

-fabric (size depends on your door)


-iron-on hem tape


-magnetic rod


-hot glue gun

DIY Shade

DIY Door Shade

No more mix-matched curtains, and I only spend $7! ($4.50 for the fabric and $2.50 for the magnets).

DIY Door Shade

Problem solved:)


  1. unmatched curtains? looks like the rod goes through the heading on one panel and the casing on the other.

    the shade is nice!

    • I tried that! (I know because that’s happened in another pair of curtains I had;) hehe! It wasn’t the case in this set.
      Ah well, turned out ok in the end! 🙂 Thank you!

  2. You are so smart and resourceful! Great job (as always!)

  3. Seriously. . . I am sure you could sew if you tried it. You are so talented! Do you have a sewing machine? If not, hello Santa! Don’t get me wrong, your curtains are awesome! But sewing does come in handy, even if all you can do is sew a straight line 🙂

  4. Good idea. I have a door like this. You may have the perfect answer … only I can imagine (since I sew a bit more than you do – =) … how to cover those magnetics with a thin layer of fabric lining. Good job!

  5. Ok, help me out. The rod that the curtain is hanging from is magnetic, correct? But from the pictures it doesn’t look like the magnets are touching the rod, only each other when you have it up. Am I looking at it wrong?

    • Right, the curtain rod is magnetic. The door is steel so it’s magnetic also – the magnets are touching the actual door.

  6. How far apart did you place the magnets?? Super cute!

  7. Sara Miller says:

    Where do you find a magnetic curtain rod? Great idea and will be trying this out. Thank you for sharing!

    • Oh gosh, it’s been so long, I can’t remember, sorry! We picked it up 11 years ago when we moved in. Try googling it, I’m sure you’ll find it somewhere:) Good luck, and thank you!

  8. They have magnetic rods at Wal-Mart!

  9. Betsy Struckman says:

    I love your idea! I am making window treatments for a friend, and this is brilliant. I have seen Roman shades at Ikea with magnetic rods, but they come only in white and the fabric is just okay. Thank you for the inspiration, and the writer above is right: as clever as you are, you would pick up sewing in a heartbeat, and sewing has been one of my most valuable skills. Most home projects require cutting carefully (you already do) and sewing straight lines. I have sewn very personalized draperies and pillows for family that I could not have afforded to buy.

  10. So confused. My door looks just like yours and is called a steel replacement door, but my magnetic rod doesn’t stick to it!

Leave a Reply to admin Cancel reply